How to Maximize Anti-Aging Benefits with PureLift Devices: Tips and Best Practices
Medically reviewed by
4 independent reviewers
Andrew Conrad Barile, PT, DPT
Doctor of Physical Therapy (DPT) | Licensed Physical Therapist (PT) | CEO and Founder, Xtreem Pulse LLC
Read bio
Dr. Andrew Conrad Barile is a Doctor of Physical Therapy and the CEO and Founder of Xtreem Pulse LLC, the engineering company behind PureLift. He earned his Doctorate in Physical Therapy from Daemen College and is a licensed physical therapist.
He brings over two decades of clinical and entrepreneurial experience across physical therapy, craniosacral therapy and medical device innovation, built on a working knowledge of human anatomy and muscle physiology.
For PureLift LAB he reviews how current is delivered across all ten levels, from sub-sensory nanocurrent and skin-level microcurrent to motor-level EMS, and how the Infuse pass fits into the same ten-minute routine.
Bertica M. Rubio, M.D.
Board-Certified Physician, Dartmouth Medical School | Medical Director, Antiaging Regenerative Medicine Clinic
Read bio
Dr. Bertica M. Rubio is a board-certified physician and Medical Director of the Antiaging Regenerative Medicine Clinic in Redlands, California. She earned her Doctor of Medicine from Dartmouth Medical School and completed her pediatrics residency at UC Irvine Medical Center.
With decades of clinical experience, she specialises in age management medicine, regenerative medicine, wound healing and growth factor therapies, and her practice integrates evidence-based medical science with advanced aesthetic treatment.
For PureLift LAB she reviews articles for medical accuracy across the whole dial, from the gentle nanocurrent and microcurrent settings through to muscle-level EMS and the Infuse pass.
Daniel Grinberg, MD, FACS
Board-Certified Otolaryngologist | Head and Neck Surgeon | Fellow, American College of Surgeons | Mount Sinai
Read bio
Daniel Grinberg, MD, FACS is a board-certified otolaryngologist and head and neck surgeon at ENT and Allergy Associates in West Nyack, New York. He earned his medical degree from Columbia University College of Physicians and Surgeons.
He completed his otolaryngology residency at New York University Medical Center, serves as Assistant Clinical Professor at Mount Sinai School of Medicine, and is a Fellow of both the American College of Surgeons and the American Academy of Otolaryngology.
For PureLift LAB he brings a wider clinical lens, connecting at-home facial stimulation from microcurrent to EMS to the anatomy underneath, with the same rigour we apply to every device specification.
Prof. Dr. med. Ivo Buschmann
Chair of Angiology, Medizinische Hochschule Brandenburg | Clinic Director, University Clinic for Angiology
Read bio
Prof. Dr. med. Ivo Buschmann is Chair of Angiology at the Medizinische Hochschule Brandenburg Theodor Fontane and Clinic Director of the University Clinic for Angiology at the Brandenburg University Hospital.
He trained at the University of Hamburg, was a Max Planck Society Fellow at the Max Planck Institute for Heart and Lung Research, and held senior consultant posts at the Charite Universitatsmedizin Berlin before his appointment as Chair in 2016.
One of Europe's leading authorities on arteriogenesis, with over 150 peer-reviewed publications and US and EU patents, he reviews for PureLift LAB how the evidence on electrical stimulation is read and where its limits lie.
Share
Getting more from a PureLift device comes down to five habits, and none of them involve turning the dial higher.
This article covers what actually decides the answer, such as:
- how often to use the device and for how long
- the serum layer and why conductivity decides the result
- where to place the probe and which direction to work
- how to combine the device with the rest of your routine
- how to care for the device so it keeps performing
and many more!
Every point below applies to Face, Pro, Pro Edition, Pro Plus and GLOW alike.
Key Points:
Use the device three to five times a week; consistency outperforms intensity.
Three minutes per side is the whole session, about ten minutes including the Infuse pass.
Any water-based serum works as the conductive layer.
Clean the probe after every session so contact stays even.
Sun protection and sleep do more for the result than raising the level.
PureLift devices are designed to deliver professional-grade facial toning and anti-aging results, but to achieve the best outcomes, following the right techniques is crucial. Here are some expert tips and best practices:
1. Consistency is Key
To see lasting results, use PureLift regularly. Aim for 3-5 sessions per week, with three minutes on each side of the face, about ten minutes in total including the Infuse pass. Three minutes a side is the whole session, and running it longer does not improve the result. This consistency helps strengthen facial muscles and promotes skin rejuvenation.
2. Proper Technique
For optimal results, focus on the correct movement. Gently glide the device over your skin, ensuring you cover all areas of your face, especially those prone to sagging like the jawline, cheeks, and forehead. Follow the natural contours of your face to stimulate deeper layers of muscle for a more lifted appearance.
3. Pre-Treatment Preparation
Before using the PureLift device, cleanse your skin thoroughly to remove any dirt, makeup, or oils. Applying a conductive gel or facial mist enhances conductivity and allows the device to work more effectively.
4. Hydration and Skincare
For best anti-aging results, pair your PureLift treatment with a hydrating serum. After your session, use a moisturizer rich in antioxidants to nourish the skin and maintain hydration. This helps seal in the benefits of the toning session and promotes long-term skin health.
5. Focus on Key Areas
Target specific areas where signs of aging appear, such as the forehead, crow’s feet, and jawline. PureLift runs nanocurrent at level 1, microcurrent at level 2 and EMS from level 3 to 10, and the EMS levels are what engage the muscles that help tighten and lift these areas, softening the appearance of fine lines and wrinkles over time.
6. Post-Treatment Care
After each session, avoid harsh products or treatments like exfoliants for 24 hours. Instead, focus on hydrating and soothing the skin to support the recovery process.
7. Track Your Progress
Taking before and after photos helps track progress and adjust your routine as needed. Noticeable improvements often appear after consistent use over several weeks, with more defined facial contours and improved skin texture.
8. Adjust Intensity Levels
Start with lower intensity settings, especially if you’re new to using facial toning devices. As your skin adjusts, gradually increase the intensity for more advanced toning and lifting effects, stopping at the level where you can see the muscle answer rather than pushing into discomfort.
By following these tips and best practices, you can maximize the anti-aging benefits of your PureLift device, helping you maintain youthful, firm skin. With consistent use and proper technique, you can enjoy long-term facial toning, softer-looking wrinkles, and skin rejuvenation, all from the comfort of your home.